250 meters

  The maximum distance for Power over Ethernet (PoE), as defined by the standard Ethernet specifications, is 100 meters (328 feet). This distance includes both the length of the Ethernet cable and any patch cables used in the setup. Beyond this limit, the power and data signals can degrade, affecting both performance and reliability.   Breaking Down the 100-Meter Limit: --- 90 meters (295 feet): This is the maximum distance for the main horizontal cable run, usually from the switch to a device like an IP camera or wireless access point. --- 10 meters (33 feet): This is the allowance for patch cables used at each end of the connection, such as from the switch to a patch panel or from the device to a wall outlet.     Extending PoE Beyond 100 Meters To extend PoE beyond the standard 100 meters, several methods and devices can be used: 1. Long-distance PoE switches: Long-distance PoE switch extends Power over Ethernet functionality over greater distances, With enhanced transmission capabilities, this switch ensures stable power and data delivery to PoE-enabled devices, such as IP cameras and wireless access points, across distances up to 250 meters, beyond the typical 100-meter limit.  1. PoE Extenders: PoE extenders allow you to stretch the distance of a PoE connection. Each extender typically adds an additional 100 meters of range, meaning you can place a device farther from the PoE switch. Multiple extenders can be daisy-chained to cover longer distances, although there are practical limits on how many can be used without signal degradation. 2. Fiber Optic Cabling with PoE Media Converters: For very long distances (hundreds or even thousands of meters), fiber optic cables can be used for data transmission, as they do not suffer from the same distance limitations as Ethernet cables. At each end of the fiber optic cable, a media converter can be used to convert the fiber signal back to Ethernet, and then PoE can be reintroduced with a PoE injector or switch. 3. PoE Repeaters (Active Hubs): PoE repeaters act similarly to PoE extenders but often include the ability to boost both the data and power signals, allowing for more consistent power delivery over longer distances. 4. Ethernet-to-PoE Converters (Ethernet Surge Suppressors): These converters help preserve the power and data signals by managing surges and power degradation that occur over long Ethernet cables. They don't necessarily extend the distance but help maintain signal integrity over longer runs.     Cable Quality Matters: The quality of the Ethernet cable used can also impact the performance of PoE over longer distances. For instance: --- Cat5e and Cat6 cables are typically used for PoE and are rated for 100 meters. --- Cat6a and Cat7 cables can handle higher frequencies and provide better shielding, which can improve performance and reduce signal loss over longer distances.     Conclusion: The standard maximum distance for PoE is 100 meters, but this can be extended using PoE extenders, fiber optic cables with media converters, or PoE repeaters. Careful attention to cable quality and the type of PoE standard in use (PoE, PoE+, or PoE++) is crucial when planning longer runs in PoE networks.