Overview
IES7511-12PGE4TF-DC, 12 Ports Gigabit Layer 3 Managed Industrial Ethernet Switch,with 4-10Gb SFP+ Uplink,DIN-Rail mount,Support ERPS
-
Physical Port
12-10/100/1000BASE-TX Fast Ethernet RJ45 ports4-1G/2.5G/10GBASE-X mini-GBIC/SFP+ slot1-RJ45 console interface for switch management and setup1-Reset button for system factory default and reboot1-USB interface for switch setupSwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 95Mpps,MAC address 16kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~56V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power,LINK/ACTMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti Shock -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authenticationLayer 3 FeaturesSupport Static routingSupport RIPSupport OSPFSupport VRRP -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupport QinQ VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports UDLDSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Gigabit Ethernet Port and 10G Fiber Port Configuration
Bench group's IES7511-8PGE4GE4TF-DC gigabit layer 3 managed industrial ethernet switch provide 8-10/100/1000Mbps RJ45 ports, with 4-10G SFP+ uplink,with 1-RJ45 console interface for switch management and setup, with 1-Reset button for system factory default and reboot, support redundant power inpout .
Four 10G SFP+ Uplink
Benchu group's 16 port layer 3 managed Industrial switch IES7511-12GE4TF-DC with 4 ports supporting 1G/2.5G/10G fiber connectivity provide high-speed data transmission capabilities essential for modern industrial applications. These high-speed ports ensure rapid and efficient transfer of large volumes of data, critical for real-time monitoring, control systems, and data-intensive operations. Faster data transfer rates reduce latency, enhancing the performance and responsiveness of industrial networks, which is crucial for maintaining seamless operations in dynamic environments.
Ethernet Ring Protection Switching (ERPS) gives to Fast Recovery
Benchu group's IES7511-4GE2GF-DC 4 Port Managed Industrial ethernet switch support Ethernet Ring Protection Switching (ERPS) , ERPS offers fast recovery times, typically within 50 milliseconds, ensuring minimal disruption in network services. This swift failover response is critical for applications requiring high reliability and low latency, such as financial transactions, video conferencing, and VoIP. By quickly re-establishing communication paths, ERPS maintains service continuity and performance, reducing the impact of network failures on business operations. The rapid recovery capability makes ERPS an attractive option for enterprises needing consistent and uninterrupted network performance.
SSH (Secure Shell) Gives to Authentication
SSH facilitates secure file transfer through protocols like SCP (Secure Copy Protocol) and SFTP (SSH File Transfer Protocol). These protocols allow users to upload, download, and manage files on remote servers securely. By leveraging SSH encryption and authentication, SCP and SFTP ensure that file transfers are protected from unauthorized access and data breaches, making them reliable tools for securely transferring sensitive data across networks.
Quality of Service (QoS) gives to Enhanced Reliability
Benchu group's IES7511-4PGE2GF-DC 4 Port Managed Industrial switch support Quality of Service (QoS) protocols increase network reliability by providing predictable and consistent performance for critical applications. By reserving bandwidth and setting specific traffic rules, QoS helps maintain service quality even during periods of high network load. This reliability is crucial for business operations that depend on uninterrupted access to critical applications, ensuring that key services remain functional and responsive under varying network conditions.
Connectivity Solutions
12 port Gigabit Managed Industrial switch with 4-10G SFP+ Uplink Connection Solution
12 port Gigabit Managed Industrial switch with 4-10G SFP+ Uplink of Ring Network Connection Solution
Specification
Technical Specifications :
IE7511-12GE4TF-DC10M/100M/1G RJ45 copper ports :
121G/2.5G/10G SFP+ (fiber) ports :
4PoE / PoE+ ports :
8Console Port (For config ) :
YesUSB port :
Yes (for firmware and config upload/ download)Reset button :
YesPower over Ethernet :
*PoE Standard :
IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over EthernetPoE Power Supply Type :
End-span: 1/2 (+), 3/6 (-)PoE Power Output :
Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af); Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)PoE Power Budget :
240 WattsPerformance Specification :
*Packet buffer memory :
12 MbForwarding modes :
Store-and-forwardBandwidth :
128 GbpsPacket forwarding rate :
77.38Mpps (64 byte packet size)MAC address database size :
16K (48-bit MAC ad-dresses)Jumbo frame support :
12KMean Time Between Failures :
160,213 hours (MTBF) @ 25°C100M Copper Latency :
8.314µs; 8.352µs; 8.451µs1G Copper Latency :
3.514µs; 3.545µs; 3.628µs1G Fiber Latency :
2.980µs; 3.101µs; 3.179µs2.5G Fiber Latency :
2.631µs; 2.752µs; 2.811µs10G Fiber Latency :
2.330µs; 2.561µs; 2.7129µsL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - DHCP :
*DHCP client :
YesDHCP snooping :
YesDHCP Server :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100VLAN routing :
YesRIP V1/V2 :
YesOSPF V2 :
YesNumber of IP VLAN interfaces :
YesPolicy routing :
YesVRRP :
YesLink Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • ITU-T G.8032 (ERPS)Management, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
16Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
170 x 148 x 48 mm (6.69 x 5.83 x 1.89 in)Weight :
1.2 kg (2.65 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
AC100~260V 50/60Hz (Dual power input)Power Consumption :
240W (when all ports used, line-rate traffic and max PoE)Max power :
19W (worst case, all ports used, full PoE, line-rate traffic) (Watts)Iddle power consumption :
12W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1G+10GMore Filters :
L3 Managed
Questions & Answers
1. What are the benefits of the 4 10Gb SFP+ uplink ports?
The 10Gb SFP+ uplink ports provide high-speed connectivity and support long-distance fiber communication, ensuring fast, reliable data transfer for large-scale industrial networks.
2. What Layer 3 features does this 12-Port gigabit Layer 3 managed industrial ethernet switch support?
This switch supports advanced Layer 3 routing features, including static routing, dynamic routing, and multicast routing, enabling efficient traffic management and optimized network performance.
3. Is this 12-Port gigabit Layer 3 managed industrial ethernet switch suitable for harsh industrial environments?
Yes, it features a rugged metal housing, operates in extreme temperatures, and is resistant to dust and moisture, making it ideal for challenging industrial conditions.
4. How does this 12-Port gigabit Layer 3 managed industrial ethernet switch enhance network security and performance?
The switch supports VLAN for network segmentation, QoS for prioritizing critical traffic, and advanced security protocols to safeguard data and ensure smooth network operation.
5. What mounting options are available for this 12-Port gigabit Layer 3 managed industrial ethernet switch?
The switch supports both DIN-rail and wall mounting, allowing flexible installation in various industrial settings while optimizing space usage.
Related Products
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-4GE2GF-DC4 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-16GE2GF-DC16 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink
-
IES7511-16GE4GF-DC16 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit SFP Uplink