Overview
IES7511-16GE2GF-DC, 16 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
16 gigabit ethernet RJ45 ports for high-speed connectivity.2 mini-GBIC/SFP slots for flexible fiber connections.1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 48Gbps,Packet forwarding rate 26.79Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
2 Gigabit SFP Uplink Ports
Equipped with 2 Gigabit SFP uplink ports, the IES7511-16GE2GF-DC offers flexible fiber optic connectivity for long-distance data transmission between network segments. These SFP ports provide scalable, high-performance uplink options to core networks, remote offices, or data centers. The ability to use fiber optic connections minimizes signal loss and ensures stable, high-speed data transmission over greater distances, making this switch ideal for industrial networks that need to expand or integrate with other infrastructure while maintaining consistent performance.
Layer 2 and Layer 3 Managed Switching
The IES7511-16GE2GF-DC supports both Layer 2 and Layer 3 managed switching, providing flexibility for a wide range of network configurations. At Layer 2, it supports features like VLAN, port aggregation, and link redundancy, which are essential for efficient data handling and network segmentation. Layer 3 static routing allows for efficient communication between different subnets, optimizing traffic flow across the network. This dual-layer functionality ensures that the switch can adapt to both simple and complex networking requirements in industrial environments.
ERPS Ring Network for Redundancy
The IES7511-16GE2GF-DC supports ERPS (Ethernet Ring Protection Switching), which ensures network redundancy and automatic recovery in case of link failures. ERPS enables the switch to form a resilient ring topology, allowing the network to continue functioning even if a cable or port goes down. This feature minimizes downtime by quickly detecting and rerouting traffic around any disruption. ERPS is critical in industrial networks where continuous, fault-tolerant operation is essential, ensuring that your critical systems stay connected without interruption.
Wide Operating Temperature Range (-40°C to 85°C)
Designed to perform in extreme conditions, the IES7511-16GE2GF-DC operates reliably across a wide temperature range of -40°C to 85°C. This wide operating temperature range makes it ideal for use in outdoor, factory, or other harsh environments where temperature fluctuations are common. Whether exposed to freezing cold or intense heat, the switch continues to provide stable and consistent performance, ensuring that industrial networks maintain uptime and productivity even in the most challenging conditions.
IP40-Rated Protection and ±8KV ESD Protection
Built for durability, the IES7511-16GE2GF-DC features an IP40-rated enclosure that protects it from dust, debris, and other environmental contaminants, making it suitable for industrial installations. Additionally, the switch is equipped with ±8KV ESD (Electrostatic Discharge) protection, safeguarding it from electrical surges and static electricity that are common in industrial environments. These features make the switch ideal for mission-critical applications in industries like manufacturing, energy, and transportation, where equipment reliability and protection against electrical interference are crucial.
Dual Power Input (DC 12V-56V) and DIN-Rail Mounting
The IES7511-16GE2GF-DC features dual power inputs (DC 12V-56V), ensuring redundant power supply for continuous operation, even if one power source fails. This redundancy is crucial for critical industrial networks that require high availability. The switch also offers DIN-rail mounting, making it easy to install in control cabinets, server racks, or industrial panels. The DIN-rail design is widely used in industrial environments, providing a secure and convenient mounting solution that saves space and simplifies installation, maintenance, and future upgrades.
Connectivity Solutions
16 Port Gigabit Industrial Managed Ethernet Switch with 2 Gigabit SFP Ring Network Connectivity Solution
16 Port Gigabit Industrial Managed Ethernet Switch with 2 Gigabit SFP Connectivity Solution
Specification
Technical Specifications :
IE7511-16GE2GF-DC10M/100M/1G RJ45 copper ports :
161.25G SFP (fiber) ports :
2Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
4.2 MbForwarding modes :
Store-and-forwardBandwidth :
48 GbpsPacket forwarding rate :
26.79Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KMean Time Between Failures :
158,124 hours (MTBF)L2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • IEEE 802.1w (RSTP) • ITU-TG.8032 (ERPS)Management, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
18Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
48 x 135 x 170 mm (1.89 x 5.31 x 6.69 in)Weight :
1.1 kg (1.98 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 12~54V, redundant power with reverse polarity protectionMax power :
18W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
10W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Related Products
-
IES7511-8GE2GF-DC8 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-8GE4GF-DC12 Ports Gigabit Managed Industrial Switch Provide 4 Gigabit SFP Uplink
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-12GE4GF-DC12 Port Gigabit Managed Industrial Ethernet Switch With 4 Gigabit SFP Uplink