Overview
IES7511-24GE2GF-DC, 24 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
24 gigabit ethernet RJ45 ports for high-speed connectivity.2 mini-GBIC/SFP slots for flexible fiber connections.1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 56Gbps,Packet forwarding rate38.69Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced Layer 2 and Layer 3 Management
The IES7511-24GE2GF-DC offers advanced Layer 2 and Layer 3 management features that enable precise control over your network. It supports VLANs, QoS, ACLs, and routing protocols, providing efficient traffic management and enhanced security for complex industrial networks. This flexibility makes it ideal for environments where network reliability and performance are crucial. Whether managing multiple devices or handling critical data flows, this industrial ethernet switch offers superior network segmentation, optimized traffic prioritization, and greater scalability for demanding industrial applications.
24 Gigabit Ethernet Ports with 2 Gigabit SFP Uplink
The IES7511-24GE2GF-DC is equipped with 24 Gigabit Ethernet ports and 2 Gigabit SFP uplink slots, delivering high-speed connectivity to a wide range of devices. The SFP uplinks enable fiber-optic connections for longer distances, ensuring robust and stable data transmission across large-scale industrial networks. This switch is ideal for applications like factory automation, surveillance, and IoT, providing reliable, high-speed data transfer to meet the demands of modern industrial environments.
ERPS Ring Network for Rapid Failover
The IES7511-24GE2GF-DC supports Ethernet Ring Protection Switching (ERPS), allowing for rapid network recovery in case of link failure. ERPS enables the network to automatically reconfigure in less than 50ms, ensuring minimal downtime and continuous network operation. This feature is essential in industrial settings where network availability is critical, such as in manufacturing, logistics, and energy systems. ERPS guarantees high network reliability and seamless operation, even during unexpected disruptions.
Wide Operating Temperature Range (-40℃ to 85℃)
Engineered for rugged industrial environments, the IES7511-24GE2GF-DC operates in extreme temperature conditions ranging from -40℃ to 85℃. This wide temperature tolerance ensures reliable operation in harsh conditions, making it ideal for outdoor deployments or environments with fluctuating temperatures, such as factories, power plants, and transportation hubs. The robust thermal design ensures the switch maintains peak performance without the need for additional cooling systems, offering both flexibility and durability for industrial applications.
Dual DC Power Input with Wide Voltage Range (12-56V)
The IES7511-24GE2GF-DC features dual DC power inputs, with a wide voltage range of 12V to 56V, ensuring a redundant power source to maintain stable operation. This dual power setup minimizes the risk of power failure, making it a reliable choice for mission-critical applications. The wide voltage compatibility also allows for easy integration into diverse industrial environments, offering flexibility and stability in factory automation, transportation, and energy systems where uninterrupted power is essential for smooth operations.
IP40-Rated Metal Enclosure with DIN-Rail Mounting
Designed for ease of installation and protection, the IES7511-24GE2GF-DC comes in an IP40-rated metal enclosure, safeguarding the switch from dust and debris while ensuring durability in industrial settings. The DIN-rail mounting option simplifies integration into control cabinets and industrial racks, saving time and installation costs. This sturdy design ensures optimal heat dissipation, which extends the lifespan of the device, while the compact form factor maximizes space efficiency, making it suitable for both compact and large-scale industrial network setups.
High ESD Protection (8kV)
The IES7511-24GE2GF-DC offers high-level electrostatic discharge (ESD) protection up to 8kV, ensuring that sensitive components are shielded from voltage surges that can occur in industrial environments. This protection helps prevent network disruptions, damage to the switch, or connected devices caused by electrostatic discharges, which are common in environments with heavy machinery or electrical equipment. The high ESD rating enhances the device’s reliability and longevity, making it a solid choice for industries requiring stable and secure network infrastructure in high-risk environments.
Connectivity Solutions
24 Port Gigabit Industrial Managed Ethernet Switch with 2 Gigabit SFP Connectivity Solution
24 Port Gigabit Industrial Managed Ethernet Switch with 2 Gigabit SFP Ring Network Connectivity Solution
Specification
Technical Specifications :
IE7511-24GE2GF-DC10M/100M/1G RJ45 copper ports :
241.25G SFP (fiber) ports :
2Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
8.1 MbForwarding modes :
Store-and-forwardBandwidth :
56 GbpsPacket forwarding rate :
38.69Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KMean Time Between Failures :
158,124 hours (MTBF)L2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • IEEE 802.1w (RSTP) • ITU-TG.8032 (ERPS)Management, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
18Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
70 x 148 x 170 mm (2.76 x 5.83 x 6.69 in)Weight :
1.3 kg (2.87 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 12~54V, redundant power with reverse polarity protectionMax power :
18W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
12W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Related Products
-
IES7511-8GE2GF-DC8 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-8GE4GF-DC12 Ports Gigabit Managed Industrial Switch Provide 4 Gigabit SFP Uplink
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-16GE4GF-DC16 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit SFP Uplink