Overview
IES7211-4PGE2GF-DC, 4 Ports Gigabit Managed Industrial Switch,With 2 Gigabit SFP Uplink,DIN-Rail mount, With Redundant Power Input
-
Physical Port
4-10/100/1000BASE-TX Gigabit Ethernet RJ45 ports2-1.25GBASE-X mini-GBIC/SFP slot1-RJ45 console interface for switch management and setup1-Reset button for system factory default and rebootSwitchingBackplane bandwidth 24Gbps,Packet forwarding rate 14.88Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlSupports PoE ManagedManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Gigabit Ethernet Port and Gigabit Fiber Port Configuration
Bench group's IES7511-4GE2GF-DC gigabit managed industrial ethernet switch provide 8-10/100/1000Mbps RJ45 ports and 2-1.25G SPF Uplink,with 1-RJ45 console interface for switch management and setup, with 1-Reset button for system factory default and reboot, support redundant power inpout.
Two Gigabit SFP Uplink
Benchu Group's IES7511-4GE2GF-DC Industrial PoE switch includes two SFP port uplinks. These SFP transceivers extend network links from 100 meters with copper cables to up to 120 kilometers with fiber optics. This long-distance capability is perfect for connecting remote locations, such as electronic police and outdoor surveillance, ensuring reliable communication. The SFP ports are hot-swappable, allowing for easy transceiver replacement or upgrades without network disruption. This feature enhances network reliability and uptime, making maintenance and upgrades seamless. It also simplifies troubleshooting and reduces downtime if a transceiver fails.
Ethernet Ring Protection Switching (ERPS) gives to Network Redundancy
Benchu group's IES7511-4PGE2GF-DC 4 Port Managed Industrial PoE switch support G.8032 ERPS (Ethernet Ring Protection Switching) significantly enhances network redundancy and reliability in CCTV applications. By creating a looped network topology, ERPS ensures that if one link fails, traffic can be rerouted through an alternative path. This failover mechanism ensures continuous video streaming and recording, which is critical for surveillance systems. With recovery times often less than 50 milliseconds, ERPS minimizes downtime, ensuring that CCTV systems remain operational and that there is no loss of critical surveillance data during network disruptions.
SSH (Secure Shell) Gives to Secure Remote Access
Benchu group's 4 Port Managed Industrial PoE switch IES7511-4PGE2GF-DC support SSH (Secure Shell) , supports strong authentication mechanisms, including password-based, key-based, and multifactor authentication. Key-based authentication uses cryptographic keys, offering enhanced security over traditional passwords. These robust authentication methods ensure that only authorized users can access the network devices or servers, reducing the risk of unauthorized access and enhancing overall security.
Quality of Service (QoS) gives to Improved Network Performance
Benchu group's IES7511-4PGE2GF-DC 4 Port Managed Industrial PoE switch support Quality of Service (QoS) is crucial for traffic prioritization in networks, ensuring that critical data gets preference over less important traffic. This is particularly beneficial for real-time applications such as VoIP, video conferencing, and online gaming, where delays or packet loss can severely impact performance. By classifying and managing network traffic, QoS ensures that high-priority data flows smoothly, reducing latency and improving the overall user experience. This prioritization is essential for maintaining the quality and reliability of time-sensitive applications in both corporate and consumer environments.
Benchu group' 4 port gigabit industrial ethernet switch support SNMP (Simple Network Management Protocol), Provides real-time monitoring and diagnostics, allowing administrators to track network performance and device status continuously. This capability enables quick detection and resolution of issues such as device failures, network congestion, or abnormal traffic patterns. Real-time data collection and analysis help maintain optimal network performance, ensuring that industrial processes run smoothly and efficiently without unexpected downtime or interruptions.
The IPv4/IPv6 dual stack protocol ensures that Bench group's 4 port gigabit industrial ethernet switch is future-proofed, allowing them to operate seamlessly in both current and future network environments. As IPv6 adoption increases, the dual stack capability ensures compatibility with newer systems while maintaining support for existing IPv4 infrastructure. This flexibility prevents the need for costly and complex upgrades, ensuring that industrial networks remain functional and up-to-date as technology evolves.
Connectivity Solutions
6 port Gigabit Managed Industrial Ethernet switch connectivity Solution for CCTV
6 port Gigabit Managed Industrial Ethernet switch Ring Network connectivity Solution for CCTV
Specification
Technical Specifications :
IE7511-4GE2GF-DC10M/100M/1G RJ45 copper ports :
41.25G SFP (fiber) ports :
2Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
1.2 MbForwarding modes :
Store-and-forwardBandwidth :
24 GbpsPacket forwarding rate :
8.93Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KMean Time Between Failures :
160,213 hours (MTBF) @ 25°C100M Copper Latency :
8.532µs; 8.613µs; 8.712µs1G Copper Latency :
3.435µs; 3.541µs; 3.643µs1G Fiber Latency :
2.993µs; 3.112µs; 3.183µsL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning TManagement, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
6Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
150 x 120 x 48 mm (5.91 x 4.73 x 1.89 in)Weight :
0.9 kg (2.2 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 48~56V, redundant power with reverse polarity protectionMax power :
12W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
7W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Questions & Answers
1. What devices can be connected to this 4-Port gigabit Layer 2 managed industrial ethernet switch?
The switch provides four 10/100/1000 Mbps Ethernet ports for industrial devices like IP cameras, wireless access points, PLCs, and other networked equipment, ensuring flexible connectivity.
2. How does the SFP fiber uplink enhance the IES7211-4PGE2GF-DC capabilities?
The two Gigabit SFP fiber ports support long-distance data transmission, with flexibility for both single-mode and multi-mode fiber optic cables, making it ideal for extending network reach.
3. Is this 4-Port gigabit Layer 2 managed industrial ethernet switch suitable for harsh industrial environments?
Yes, the switch is housed in an IP40-rated aluminum casing, designed to withstand extreme temperatures (-40°C to 75°C), dust, and vibrations, making it perfect for industrial applications.
4. What network management features does this 4-Port gigabit Layer 2 managed industrial ethernet switch offer?
It supports ERPS, STP/FSTP/MSTP, VLAN tagging, QoS, and IGMP snooping for efficient traffic management, network optimization, and remote monitoring for ease of maintenance.
5. How does the redundant power input improve reliability?
The switch features redundant power inputs, ensuring continuous operation even in case of a power failure, enhancing overall network uptime and reliability in critical applications.
Related Products
-
IES7511-8GE2GF-DC8 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-8GE4GF-DC12 Ports Gigabit Managed Industrial Switch Provide 4 Gigabit SFP Uplink
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-12GE4GF-DC12 Port Gigabit Managed Industrial Ethernet Switch With 4 Gigabit SFP Uplink