Overview
IES7211-8PGE2GF-BOS, 8 Ports Booster PoE Switch,with 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
8 gigabit ethernet RJ45 ports for high-speed connectivity2 mini-GBIC/SFP slots for flexible fiber connections1 RJ45 console port for easy management access1 reset button for quick factory reset and rebootPower over Ethernet8 ports supporting DC48V PoE power to PD deviceSupport IEEE 802.3af/at Power over Ethernet /PSESupports PoE Power up to 30 watts for each PoE portAll power up to 100W for PoE budgetSwitchingBackplane bandwidth 24Gbps,Packet forwarding rate 14.88Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~24V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlSupports PoE ManagedManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Built-in Power Booster
The built-in power booster converts a DC input of 12V-24V to 48V, which is crucial for deploying standard PoE devices like IP cameras and wireless APs on vehicles like buses, trains, and ships where only lower DC voltages are available. This feature is ideal for public transportation systems and mobile applications.
PoE Power Delivery
The IES7511-8PGE2GF-BOS delivers up to 100W of PoE power, with each port capable of providing 15.4W. It efficiently powers devices such as IP cameras, PoE-enabled wireless routers, and other connected devices, helping to reduce the need for additional power cables, streamlining installation.
Wide Operating Temperature
Engineered to operate under extreme conditions, this 8 Port booster PoE switch works reliably within a temperature range of -25°C to 60°C. This makes it suitable for both indoor and outdoor use in environments like railways, traffic systems, and smart city applications, where temperature fluctuations are common.
IP40-rated Aluminum Alloy Enclosure
Housed in a robust aluminum alloy enclosure with an IP40 rating, the switch is protected against dust, debris, and vibration. This industrial-grade design ensures the switch remains functional even in harsh environments, such as sea and transportation systems.
Advanced Networking Features
It supports advanced Layer 2 networking features like VLAN for segmenting traffic, QoS for prioritizing critical data, and IGMP Snooping for multicast traffic management. These features are ideal for optimizing network performance in complex industrial and transportation networks.
Redundant Power Inputs
With dual power inputs, this 8 port booster PoE switch offers redundancy, ensuring uninterrupted operation even if one power source fails. This feature is critical for mission-critical applications, such as surveillance, where downtime can result in compromised security.
DIN Rail Mounting for Vibration Resistance
Designed with DIN rail mounting, the booster PoE switch resists damage from vibrations caused by vehicle movement. This feature makes it ideal for mobile or vehicular installations, ensuring the switch can handle continuous physical stress without compromising performance.
Connectivity Solutions
8 Port Booster PoE Switch for Bus
8 Port Booster PoE Switch for Rail Transit
Specification
Technical Specifications :
IE7511-8GE2GF-BOS10M/100M/1G RJ45 copper ports :
81.25G SFP (fiber) ports :
2PoE / PoE+ ports :
8Power Supply Type :
DC 12V-24VConsole Port (For config ) :
YesReset button :
YesPower over Ethernet :
*PoE Standard :
IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over EthernetPoE Power Supply Type :
End-span: 1/2 (+), 3/6 (-)PoE Power Output :
Per port 48V DC, 320mA. max. 15.4 watts (IEEE 802.3af); Per port 48V DC, 630mA. max. 30 watts (IEEE 802.3at)Performance Specification :
*Packet buffer memory :
1.6 MbForwarding modes :
Store-and-forwardBandwidth :
24 GbpsPacket forwarding rate :
14.88Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning TManagement, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
6Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
150 x 130 x 48 mm (5.91 x 5.12 x 1.89 in)Weight :
0.9 kg (1.98 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 12~24V, redundant power with reverse polarity protectionPower Consumption :
100W (when all ports used, line-rate traffic and max PoE)Max power :
10W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
7W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Environmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Questions & Answers
1. What is the total power budget of this 8 Ports booster PoE Switch?
The switch provides a total power budget of 100W, delivering up to 30W per PoE port.
2. Does the IES7211-8PGE2GF-BOS support Gigabit Ethernet speeds?
Yes, the switch supports 10/100/1000 Mbps speeds on all 8 ports.
3. What input power does this 8 Ports booster PoE Switch require?
It requires DC input between 12V and 24V, with a built-in booster to supply 48V for PoE devices.
4. Can it power high-demand PoE devices?
Yes, it supports IEEE 802.3af/at standards, delivering up to 30W per port for devices like IP cameras and wireless access points.
5. What advanced network features does this 8 Ports booster PoE Switch include?
It includes features like QoS for traffic prioritization, VLAN for network segmentation, and IGMP Snooping for multicast traffic optimization.
6. What kind of network redundancy features does it support?
It supports ERPS, STP, RSTP, and MSTP protocols for ensuring network reliability and preventing loops.
7. Is it suitable for harsh industrial environments?
Yes, with an IP40-rated enclosure and an operating temperature range of -40°C to 85°C, it is built for rugged conditions.
8. Does this 8 Ports booster PoE Switch support dual power inputs?
Yes, it has dual power inputs for added reliability and stability in case of power failure.
9. Is the IES7211-8PGE2GF-BOS easy to install in industrial applications?
Yes, it supports DIN-rail mounting, which ensures secure and convenient installation in vehicles and other industrial environments.
Downloads
Related Products
-
IES7231D-8PGE-M128 Ports M12 Gigabit PoE Switch
-
IES7231C-8PGE-M128 Ports Gigabit M12 PoE Switch
-
IES7511-4PGE2GF-BOS4 Ports Booster PoE Switch
-
IES7511-8PGE2GE4GF-BOS8 Port Booster PoE Switch With 2 Gigabit RJ45 And 4 Gigabit SFP Uplink