Overview
IES7211-8GE2GF-DC, 8 Ports Gigabit Managed Industrial Switch,with 2 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
8 gigabit ethernet RJ45 ports for high-speed connectivity.2 mini-GBIC/SFP slots for flexible fiber connections.1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 24Gbps,Packet forwarding rate 14.88Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlSupports PoE ManagedManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Ethernet Ring Protection Switching (ERPS)
The IES7511-8GE2GF-DC support ERPS provide high availability in ring network topologies by enabling fast recovery from link failures. When a failure occurs, ERPS quickly reroutes traffic around the broken link, minimizing data loss and ensuring uninterrupted service. This rapid recovery capability is essential for industrial applications that require constant data flow, such as real-time monitoring systems and control networks. ERPS enhances the reliability of the entire network by supporting automatic restoration and maintaining continuous communication, which is vital in mission-critical scenarios.
Advanced VLAN Support
This 8 port gigabit industrial switch offers comprehensive Virtual Local Area Network (VLAN) capabilities, allowing users to segment network traffic for improved performance and security. VLANs help in isolating sensitive data and minimizing broadcast traffic, thereby enhancing overall network efficiency. With support for multiple VLAN configurations, users can tailor their network architecture to fit specific operational needs. This feature is crucial for organizations seeking to manage network resources effectively while maintaining strict security protocols, making it ideal for both small and large-scale industrial applications.
Comprehensive QoS Features
Quality of Service (QoS) features are integral to managing bandwidth and ensuring that critical applications receive the necessary priority. The IES7511-8GE2GF-DC supports traffic classification and prioritization based on predefined rules, allowing for smoother performance during peak usage times. By allocating bandwidth to high-priority applications, such as video surveillance or voice over IP (VoIP), users can minimize latency and ensure optimal user experience.
Robust Security Protocols
This 8 port managed industrial switch incorporates advanced security measures, including access control lists (ACLs), IEEE 802.1X authentication, and RADIUS support. These features protect the network from unauthorized access and potential threats, ensuring that sensitive information remains secure. By implementing role-based access controls, administrators can restrict access to critical network resources, thereby enhancing security protocols.
Wide Operating Temperature Range
Designed for industrial use, this 8 port managed industrial switch operates effectively in temperatures ranging from -40°C to 85°C. This broad temperature tolerance allows the switch to perform reliably in harsh environments, such as factories, outdoor locations, or unconditioned spaces. The ability to withstand extreme temperatures minimizes the risk of equipment failure, ensuring continuous operation and reducing maintenance costs.
IP40-Rated Industrial Design
The IES7511-8GE2GF-DC features an IP40-rated design, which protects it from dust and other particulates. This rugged construction ensures that the device can withstand the challenges of industrial environments while maintaining optimal performance. The durable design is complemented by dual power inputs, providing redundancy to enhance reliability. In mission-critical applications, minimizing downtime and ensuring continuous network service.
Flexible Management Options
Offering various management options, including web, CLI, and SNMP interfaces, the IES7511-8GE2GF-DC allows for easy configuration and monitoring. Users can manage network settings, monitor performance, and troubleshoot issues remotely, making it ideal for industrial environments where accessibility can be challenging. The intuitive interface simplifies management tasks, enabling administrators to respond quickly to network demands. This flexibility in management ensures that the IES7511-8GE2GF-DC can adapt to the evolving needs of the business, supporting efficient and effective network operations.
Connectivity Solutions
8 Port Gigabit Managed Industrial Switch with 2 Gigabit SFP Connectivity Solution
8 Port Gigabit Managed Industrial Switch with 2 Gigabit SFP Ring Network Connectivity Solution
Specification
Technical Specifications :
IE7511-8GE2GF-DC10M/100M/1G RJ45 copper ports :
81.25G SFP (fiber) ports :
2Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
2.1 MbForwarding modes :
Store-and-forwardBandwidth :
24 GbpsPacket forwarding rate :
14.88Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KMean Time Between Failures :
160,213 hours (MTBF) @ 25°C100M Copper Latency :
8.532µs; 8.613µs; 8.712µs1G Copper Latency :
3.435µs; 3.541µs; 3.643µs1G Fiber Latency :
2.993µs; 3.112µs; 3.183µsL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning TManagement, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
6Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
150 x 130 x 48 mm (5.91 x 5.12 x 1.89 in)Weight :
1 kg (2.2 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 12~54V, redundant power with reverse polarity protectionMax power :
15W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
8W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Questions & Answers
1. What types of devices can be connected to this 8-Port industrial managed switch?
This switch supports eight 10/100/1000 Mbps Ethernet ports, ideal for connecting devices like IP cameras, access points, PLCs, and more in industrial environments such as manufacturing and utilities.
2. How do the SFP uplink ports benefit my network?
The two Gigabit SFP uplink ports allow for flexible fiber connections, enabling long-distance data transmission and smooth integration with larger networks, enhancing scalability and network reach.
3. What advanced network features does this 8-Port industrial managed switch support?
The switch supports VLAN, QoS, IGMP snooping, and Layer 3 static routing, optimizing network traffic, ensuring efficient data flow, and enabling inter-VLAN communication for enhanced performance.
4. Is this 8-Port industrial managed switch suitable for use in harsh environments?
Yes, it operates in extreme temperatures ranging from -40°C to 85°C and features an IP40-rated enclosure for protection against dust, making it perfect for outdoor and demanding industrial conditions.
5. How does the redundant power input enhance reliability?
The switch includes dual power inputs, ensuring continuous operation even if one power source fails, reducing the risk of network downtime in critical industrial applications.
Related Products
-
IES7511-8GE4GF-DC12 Ports Gigabit Managed Industrial Switch Provide 4 Gigabit SFP Uplink
-
IES7511-10GE4GF-DC14 Ports Gigabit Managed Industrial Switch With 4 Gigabit SFP Uplink
-
IES7511-12GE4GF-DC12 Port Gigabit Managed Industrial Ethernet Switch With 4 Gigabit SFP Uplink
-
IES7511-16GE2GF-DC16 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink