Overview
IES7521-24GE4GC-AC, 24 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit RJ45/SFP Uplink,Rack Mount
-
Physical Port
24 gigabit ethernet RJ45 ports for high-speed connectivity.2 mini-GBIC/SFP slots for flexible fiber connections.4-10/100/1000Mbps Gigabit Ethernet port4-1.25Gbps mini-GBIC SFP interface combo1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 35.72Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseRack mount design100~260V AC, redundant powerSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced L2-L3 Managed Capabilities
The IES7521-24GE4GC-AC provides comprehensive Layer 2 and Layer 3 management, allowing users to effectively control and optimize their network. Layer 2 features include VLAN support for network segmentation, Link Aggregation (LAG) for increased bandwidth, and QoS (Quality of Service) for prioritizing critical traffic. Layer 3 features, including static routing, enable efficient forwarding between subnets. This flexibility in network management ensures seamless integration and scaling in complex industrial environments, enhancing both network performance and security.
High-Speed Gigabit Ethernet Ports
Equipped with 24 Gigabit Ethernet ports and 4 additional Gigabit RJ45/SFP uplink ports, the IES7521-24GE4GC-AC delivers exceptional performance and scalability. The 24 ports support high-bandwidth applications such as video surveillance, industrial automation, and real-time data processing. The inclusion of 4 uplink ports provides flexibility, enabling both copper and fiber optic connectivity to expand network reach. This switch ensures efficient data transfer with minimal latency, ideal for demanding industrial environments requiring fast and reliable data exchange.
ERPS Ring Network for Redundancy and Fast Recovery
The IES7521-24GE4GC-AC supports Ethernet Ring Protection Switching (ERPS), offering network redundancy and fast failover. ERPS allows for sub-50ms recovery time, minimizing network downtime and ensuring continuous connectivity in case of network failures. This feature is critical for applications where high availability is required, such as industrial automation, transportation, and security monitoring. ERPS improves overall network resilience, ensuring that operations remain uninterrupted, even in the event of hardware failures or other network issues.
Rugged Design for Harsh Industrial Environments
The IES7521-24GE4GC-AC is built to withstand harsh industrial conditions. It features a durable, IP40-rated metal enclosure that protects the switch from dust and other environmental contaminants. With an extended operating temperature range of -40℃ to 85℃, this switch is perfect for deployment in extreme environments such as factories, warehouses, or outdoor installations. Its rugged design ensures reliable performance even in challenging conditions, making it an ideal solution for industrial networks that require long-term durability and high uptime.
8KV ESD Protection for Enhanced Stability
This industrial switch includes 8KV electrostatic discharge (ESD) protection, ensuring the device remains stable and operational in environments prone to electrical surges. ESD protection safeguards the internal components from static buildup and electrical noise, which is common in industrial settings. This feature reduces the risk of network downtime or hardware damage caused by ESD, contributing to the overall stability and longevity of the switch. It’s particularly valuable in environments where electrical interference is frequent, such as manufacturing plants and power stations.
Rack-Mountable Design for Easy Installation
The IES7521-24GE4GC-AC is designed for easy installation in standard 19-inch racks. Its rack-mountable form factor allows for efficient use of space and simplifies the setup process in network closets, control rooms, or industrial cabinets. The sturdy mounting design ensures that the switch remains securely in place, even in vibration-prone environments. This makes it an ideal choice for environments where floor space is limited and where a professional, organized installation is required to maintain a clean and structured network setup.
Dual AC Power Inputs for High Reliability
The IES7521-24GE4GC-AC features dual AC power inputs with an input range of 100~260V, providing enhanced power redundancy. This ensures that the switch remains operational even if one power source fails, reducing the risk of downtime and system disruptions. Dual power inputs are particularly important for critical industrial applications where continuous network uptime is essential. By offering power redundancy, the switch helps users maintain high availability, making it a reliable choice for mission-critical network systems that cannot afford power interruptions.
Connectivity Solutions
Layer 2 Managed 24 Port Industrial Switch 4 Gigabit SFP Uplink Connectivity Solution
Layer 2 Managed 24 Port Industrial Switch 4 Gigabit SFP Uplink Ring Network Connectivity Solution
Specification
Technical Specifications :
IE7521-24GE4GC-DC10M/100M/1G RJ45 copper ports :
24Gigabit R4J5 and SFP Combo :
4Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
8.1 MbForwarding modes :
Store-and-forwardBandwidth :
128 GbpsPacket forwarding rate :
47.62Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • IEEE 802.1w (RSTP) • ITU-TG.8032 (ERPS)Management, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
28Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity;Per device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
440 x 290 x 46 mm (17.32 x 11.32 x 1.81 in)Weight :
<5.6 kg (12.35 lb)Installation :
Rack MountingShell protection :
P40 high-strength aluminum casePower Requirements :
AC 100~260V 50/60Hz redundant powerPower Consumption :
*Max power :
18W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
12W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Related Products
-
IES7521-16GE4GC-AC16 Port Gigabit Industrial Managed Ethernet Switch With 4 Gigabit RJ45/SFP Uplink
-
IES7221-16GE4GC-DC16 Port Gigabit Industrial Ethernet Switch With 4 Gigabit RJ45/SFP Uplink
-
IES7211-5GE1GF-DC5 Ports Gigabit Industrial Ethernet Switch With 1 Gigabit SFP Uplink
-
IES7211-4GE2GF-DC4 Ports Gigabit Industrial Ethernet Switch With 2 Gigabit SFP Uplink