Overview
IES7521-24GF8GEC4TF-AC, 24 Port Gigabit SFP Industrial Managed Ethernet Switch with 8 Gigabit RJ45 Combo and 4-10Gb SFP+ Uplink,Rack mount,Support ERPS
-
Physical Port
8-10/100/1000BASE-TX Fast Ethernet RJ45 ports with PoE+ (Ports 1 to 8)4-10/100/1000BASE-TX Fast Ethernet RJ45 ports (Port 9 to 12)4-1G/2.5G/10GBASE-X mini-GBIC/SFP+ slot (Ports 13 to 16)1-RJ45 console interface for switch management and setup1-Reset button for system factory default and reboot1-USB interface for switch setupSwitchingBackplane bandwidth 128Gbps,Packet forwarding rate 95Mpps,MAC address 16kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design48~56V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power,PoE Working and LINK/ACTLayer 3 FeaturesSupport Static routingSupport RIPSupport OSPFSupport VRRP -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupport QinQ VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports UDLDSupports Quality of Service (Qos)Supports Static routingSupports Port Error DisableSupports Rate LimitSupports Storm ControlSupports PoE ManagedManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Advanced L2-L3 Managed Capabilities
The IES7521-24GF8GEC4TF-AC offers advanced Layer 2 and Layer 3 managed features for optimal network management. Layer 2 functionalities like VLANs, Link Aggregation (LAG), and Quality of Service (QoS) allow for secure, efficient traffic management, ensuring that critical data is prioritized. Layer 3 static routing allows for inter-network communication, improving data flow and reducing network congestion. These features provide businesses with enhanced flexibility and scalability, making the switch ideal for dynamic, mission-critical industrial environments where performance and security are key.
8 Gigabit RJ45 Combo and 4 10Gb SFP+ Uplink Ports
This switch is equipped with 8 Gigabit RJ45 combo ports and 4 10Gb SFP+ uplink ports, allowing for flexible and high-speed connectivity. The combo ports provide the versatility of using either copper (RJ45) or fiber-optic (SFP) connections, based on network requirements. The 10Gb SFP+ uplinks provide high-bandwidth, low-latency data transfer, ideal for large-scale industrial networks or applications requiring substantial data throughput. These features ensure that the switch is adaptable to a wide range of industrial networking environments and future-proof as network demands grow.
ERPS Ring Network for High Network Resiliency
The IES7521-24GF8GEC4TF-AC features Ethernet Ring Protection Switching (ERPS), which is essential for ensuring high availability and minimal downtime in critical network infrastructure. ERPS provides automatic network recovery by rerouting traffic in less than 50ms in the event of a link failure, ensuring network continuity and reliability. This feature is crucial for industrial automation systems, video surveillance, and other mission-critical applications where network outages can lead to operational disruptions. ERPS ensures that your network remains operational, even in adverse conditions, by providing robust fault-tolerant capabilities.
Rugged Industrial-Grade Design
Designed for demanding industrial environments, the IES7521-24GF8GEC4TF-AC features an IP40-rated metal enclosure, providing protection against dust and debris. The rugged, durable construction ensures that the switch operates reliably even in harsh conditions such as factories, outdoor locations, and control rooms. The switch is engineered to operate across an extreme temperature range of -40°C to 85°C, making it suitable for environments with high temperature fluctuations or exposure to extreme heat or cold. This robust design ensures long-lasting performance in challenging industrial settings.
8KV ESD Protection for Enhanced Stability
The IES7521-24GF8GEC4TF-AC includes 8KV Electrostatic Discharge (ESD) protection, ensuring stability and reliability in environments prone to electrical surges and static buildup. ESD can cause equipment failure, data loss, and network disruptions, making it a significant concern in industrial environments. The built-in 8KV ESD protection shields the switch from electrical interference, enhancing its operational reliability. This protection is particularly valuable in industrial sectors like manufacturing, power plants, and transportation, where electrostatic discharges are common, safeguarding the network infrastructure against unexpected failures.
Rack-Mountable for Space-Efficient Installation
The IES7521-24GF8GEC4TF-AC is designed to be mounted in standard 19-inch racks, making it an ideal solution for industrial control rooms, server cabinets, and network data centers. The rack-mountable design optimizes space, ensuring that the switch fits neatly into a structured setup, reducing clutter and improving cable management. Additionally, this design helps maintain organization in environments where space is limited. The sturdy rack-mount ensures that the switch remains securely in place, minimizing the risk of physical damage or accidental disconnections, while providing easy access for maintenance and upgrades.
Dual AC Power Inputs for Redundant Power Supply
To ensure continuous operation, the IES7521-24GF8GEC4TF-AC is equipped with dual AC power inputs (100-260V), offering power redundancy in case one input fails. This feature is essential for mission-critical industrial applications where network uptime is crucial. If one power supply encounters an issue, the second power source automatically takes over, ensuring that the switch remains operational without any interruptions. This dual power input configuration is especially useful in industries like automation, security, and transportation, where power disruptions can have significant operational consequences.
Connectivity Solutions
12 port Gigabit Layer 3 Managed Industrial switch with 4 Gigabit RJ45 and 4-10G SFP+ Uplink of connection Solution
12 port Gigabit Layer 3 Managed Industrial switch with 4 Gigabit RJ45 and 4-10G SFP+ Uplink of Ring Network connection Solution
Specification
Technical Specifications :
IE7511-8PGE4GE4TF-DC10M/100M/1G RJ45 copper ports :
121G/2.5G/10G SFP+ (fiber) ports :
4PoE / PoE+ ports :
8Console Port (For config ) :
YesUSB port :
Yes (for firmware and config upload/ download)Reset button :
YesPower over Ethernet :
*PoE Standard :
IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over EthernetPoE Power Supply Type :
End-span: 1/2 (+), 3/6 (-)PoE Power Output :
Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af); Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)PoE Power Budget :
240 WattsPerformance Specification :
*Packet buffer memory :
12 MbForwarding modes :
Store-and-forwardBandwidth :
128 GbpsPacket forwarding rate :
77.38Mpps (64 byte packet size)MAC address database size :
16K (48-bit MAC ad-dresses)Jumbo frame support :
12KMean Time Between Failures :
160,213 hours (MTBF) @ 25°C100M Copper Latency :
8.314µs; 8.352µs; 8.451µs1G Copper Latency :
3.514µs; 3.545µs; 3.628µs1G Fiber Latency :
2.980µs; 3.101µs; 3.179µs2.5G Fiber Latency :
2.631µs; 2.752µs; 2.811µs10G Fiber Latency :
2.330µs; 2.561µs; 2.7129µsL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - DHCP :
*DHCP client :
YesDHCP snooping :
YesDHCP Server :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100VLAN routing :
YesRIP V1/V2 :
YesOSPF V2 :
YesNumber of IP VLAN interfaces :
YesPolicy routing :
YesVRRP :
YesLink Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D (STP) • IEEE 802.1s (MSTP) • IEEE 802.1w (RSTP) • ITU-T G.8032 (ERPS)Management, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
16Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
170 x 148 x 48 mm (6.69 x 5.83 x 1.89 in)Weight :
1.2 kg (2.65 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 48~54V, redundant power with reverse polarity protectionPower Consumption :
240W (when all ports used, line-rate traffic and max PoE)Max power :
18W (worst case, all ports used, full PoE, line-rate traffic) (Watts)Iddle power consumption :
12W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1G+10GMore Filters :
L3 Managed
Questions & Answers
Downloads
- 12 port Gigabit Layer 3 Managed Industrial Ethernet swtich with 4-10G SFP+ Datasheet (IES7511-12GE4TF-DC)
Related Products
-
IES7521-24GE8GFC4TF-AC24 Port Gigabit Industrial Managed Ethernet Switch With 8 Gigabit SFP Combo And 4-10Gb SFP+ Uplink
-
IES7521-48GE4TF-AC48 Port Gigabit Industrial Managed Ethernet Switch With 4-10Gb SFP+ Uplink
-
IES7521-24GE4TF-AC24 Port Gigabit Industrial Managed Ethernet Switch With 4-10Gb SFP+ Uplink
-
IES7521-16GE4TF-AC16 Port Gigabit Industrial Managed Ethernet Switch With 4-10Gb SFP+ Uplink